-
Shear Strength
Shear Strength is defined as the value of shear stress, which causes contiguous parts of a body to slide with respect to each other in a direction parallel to their plane of contact, reached when the material ruptures.
-
Compressive Strength
Compressive Strength is defined as the value of uniaxial compressive stress reached when the materials fails completely.Compressive Strength is a key mechanical parameter, representing the material’s ability to resist deformation under load. -
Flexural Strength
Flexural Strength is defined as the maximum stress the material will withstand in bending at the moment of rupture.
-
Tensile Strength
The maximum tensile stress sustained by a plastic specimen before it fails in a tension (a pulling force) test.
-
Area Weight
Area Weight is defined as the weight per unit area of tape or fabric. Typical units are g/cm2, g/m2, ounces/foot2, and ounces/yard2.
-
Combustible Content
Combustible Content is defined as the percentage of combustible in a fiberglass product which is expressed by %. .
-
Moisture Content
Moisture Content is defined as the percentage of water in a fiberglass product.
-
Breakage Strength
Breakage strength refers to the point at which the specimen will break from applied stress.
-
Linear Density
Liner density is defined in term of the weight per unit length. Its unit is tex, which is equal to the mass in grams of 1 km of yarn, filament, fiber or other textile strand. -
Yield
Yield is a measurement of the strand length per unit weight. Its units are yards/pound (ypp).
Tendering
CONTACT US
加盟巨石